dmesg - Intel Pentium 4 3.20GHz
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-59-generic (buildd@lgw01-32) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #98-Ubuntu SMP Fri Jul 24 21:06:14 UTC 2015 (Ubuntu 3.13.0-59.98-generic 3.13.11-ckt22)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007f686bff] usable
BIOS-e820: [mem 0x000000007f686c00-0x000000007f688bff] ACPI NVS
BIOS-e820: [mem 0x000000007f688c00-0x000000007f68abff] ACPI data
BIOS-e820: [mem 0x000000007f68ac00-0x000000007fffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fed003ff] reserved
BIOS-e820: [mem 0x00000000fed20000-0x00000000fed9ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
Notice: NX (Execute Disable) protection missing in CPU!
SMBIOS 2.3 present.
DMI: Dell Inc. OptiPlex GX280 /0G5611, BIOS A03 09/17/2004
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x7f686 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 07F800000 mask FFF800000 uncachable
2 base 07F700000 mask FFFF00000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2040MB, range: 8MB, type UC
reg 2, base: 2039MB, range: 1MB, type UC
total RAM covered: 2039M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 16M num_reg: 3 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2039MB, range: 1MB, type UC
reg 2, base: 2040MB, range: 8MB, type UC
found SMP MP-table at [mem 0x000fe710-0x000fe71f] mapped at [c00fe710]
Scanning 1 areas for low memory corruption
initial memory mapped: [mem 0x00000000-0x01ffffff]
Base memory trampoline at [c009b000] 9b000 size 16384
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
init_memory_mapping: [mem 0x37800000-0x379fffff]
[mem 0x37800000-0x379fffff] page 2M
init_memory_mapping: [mem 0x34000000-0x377fffff]
[mem 0x34000000-0x377fffff] page 2M
init_memory_mapping: [mem 0x00100000-0x33ffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x33ffffff] page 2M
init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
[mem 0x37a00000-0x37bfdfff] page 4k
BRK [0x01b9b000, 0x01b9bfff] PGTABLE
RAMDISK: [mem 0x35c1a000-0x36e04fff]
ACPI: RSDP 000fec00 000014 (v00 DELL )
ACPI: RSDT 000fcc04 000040 (v01 DELL GX280 00000007 ASL 00000061)
ACPI: FACP 000fcc44 000074 (v01 DELL GX280 00000007 ASL 00000061)
ACPI: DSDT fffd026c 0030BF (v01 DELL dt_ex 00001000 MSFT 0100000D)
ACPI: FACS 7f686c00 000040
ACPI: SSDT fffd3468 0000BA (v01 DELL st_ex 00001000 MSFT 0100000D)
ACPI: APIC 000fccb8 000072 (v01 DELL GX280 00000007 ASL 00000061)
ACPI: BOOT 000fcd2a 000028 (v01 DELL GX280 00000007 ASL 00000061)
ACPI: ASF! 000fcd52 000067 (v16 DELL GX280 00000007 ASL 00000061)
ACPI: MCFG 000fcdb9 00003E (v01 DELL GX280 00000007 ASL 00000061)
ACPI: HPET 000fcdf7 000038 (v01 DELL GX280 00000007 ASL 00000061)
ACPI: Local APIC address 0xfee00000
1146MB HIGHMEM available.
891MB LOWMEM available.
mapped low ram: 0 - 37bfe000
low ram: 0 - 37bfe000
BRK [0x01b9c000, 0x01b9cfff] PGTABLE
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
Normal [mem 0x01000000-0x37bfdfff]
HighMem [mem 0x37bfe000-0x7f685fff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009ffff]
node 0: [mem 0x00100000-0x7f685fff]
On node 0 totalpages: 521765
free_area_init_node: node 0, pgdat c19a1780, node_mem_map f4c2a020
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3999 pages, LIFO batch:0
Normal zone: 1752 pages used for memmap
Normal zone: 224254 pages, LIFO batch:31
HighMem zone: 2294 pages used for memmap
HighMem zone: 293512 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
e820: [mem 0x80000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @f7bba000 s35520 r0 d21824 u57344
pcpu-alloc: s35520 r0 d21824 u57344 alloc=14*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519981
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
allocated 4174888 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (00037bfe:0007f686)
Memory: 2035272K/2087060K available (6557K kernel code, 641K rwdata, 2772K rodata, 880K init, 924K bss, 51788K reserved, 1174048K highmem)
virtual kernel memory layout:
fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc19bf000 - 0xc1a9b000 ( 880 kB)
.data : 0xc16678f4 - 0xc19be640 (3419 kB)
.text : 0xc1000000 - 0xc16678f4 (6558 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
NR_IRQS:2304 nr_irqs:712 16
CPU 0 irqstacks, hard=f7008000 soft=f700a000
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3192.219 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6384.43 BogoMIPS (lpj=12768876)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 4 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 64, 4MB 64
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 32K (c1a9b000 - c1aa3000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 27876 entries in 55 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Pentium(R) 4 CPU 3.20GHz (fam: 0f, model: 03, stepping: 04)
Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
... version: 0
... bit width: 40
... generic registers: 18
... value mask: 000000ffffffffff
... max period: 0000007fffffffff
... fixed-purpose events: 0
... event mask: 000000000003ffff
CPU 1 irqstacks, hard=f7100000 soft=f7102000
x86: Booting SMP configuration:
Initializing CPU#1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
.... node #0, CPUs: #1
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (12768.87 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x7f686c00-0x7f688bff] (8192 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 16:51:45, date: 04/18/16
NET: Registered protocol family 16
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x80000000-0xdfffffff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff] (ignored)
PCI: root bus 00: using default resources
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
pci 0000:00:00.0: [8086:2580] type 00 class 0x060000
pci 0000:00:01.0: [8086:2581] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:2582] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xdff00000-0xdff7ffff]
pci 0000:00:02.0: reg 0x14: [io 0xe898-0xe89f]
pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff pref]
pci 0000:00:02.0: reg 0x1c: [mem 0xdfec0000-0xdfefffff]
pci 0000:00:02.1: [8086:2782] type 00 class 0x038000
pci 0000:00:02.1: reg 0x10: [mem 0xdff80000-0xdfffffff]
pci 0000:00:1c.0: [8086:2660] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:2662] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:2658] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0xff80-0xff9f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:2659] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0xff60-0xff7f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:265a] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0xff40-0xff5f]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.3: [8086:265b] type 00 class 0x0c0300
pci 0000:00:1d.3: reg 0x20: [io 0xff20-0xff3f]
pci 0000:00:1d.3: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:265c] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xffa80800-0xffa80bff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1e.2: [8086:266e] type 00 class 0x040100
pci 0000:00:1e.2: reg 0x10: [io 0xec00-0xecff]
pci 0000:00:1e.2: reg 0x14: [io 0xe8c0-0xe8ff]
pci 0000:00:1e.2: reg 0x18: [mem 0xdfebfe00-0xdfebffff]
pci 0000:00:1e.2: reg 0x1c: [mem 0xdfebfd00-0xdfebfdff]
pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:2640] type 00 class 0x060100
pci 0000:00:1f.0: address space collision: [io 0x0800-0x087f] conflicts with ACPI PM1a_EVT_BLK [??? 0x00000800-0x00000803 flags 0x80000000]
pci 0000:00:1f.0: quirk: [io 0x0880-0x08bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0c00-0c7f
pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 00e0-00ef
pci 0000:00:1f.1: [8086:266f] type 00 class 0x01018a
pci 0000:00:1f.1: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:1f.1: reg 0x14: [io 0x03f4-0x03f7]
pci 0000:00:1f.1: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:1f.1: reg 0x1c: [io 0x0374-0x0377]
pci 0000:00:1f.1: reg 0x20: [io 0xffa0-0xffaf]
pci 0000:00:1f.2: [8086:2651] type 00 class 0x01018f
pci 0000:00:1f.2: reg 0x10: [io 0xfe00-0xfe07]
pci 0000:00:1f.2: reg 0x14: [io 0xfe10-0xfe13]
pci 0000:00:1f.2: reg 0x18: [io 0xfe20-0xfe27]
pci 0000:00:1f.2: reg 0x1c: [io 0xfe30-0xfe33]
pci 0000:00:1f.2: reg 0x20: [io 0xfea0-0xfeaf]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:266a] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x20: [io 0xe8a0-0xe8bf]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [mem 0xdfd00000-0xdfdfffff]
pci 0000:02:00.0: [14e4:1677] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [mem 0xdfcf0000-0xdfcfffff 64bit]
pci 0000:02:00.0: PME# supported from D3hot D3cold
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [mem 0xdfc00000-0xdfcfffff]
pci 0000:03:00.0: [1095:3132] type 00 class 0x010400
pci 0000:03:00.0: reg 0x10: [mem 0xdfafbf80-0xdfafbfff 64bit]
pci 0000:03:00.0: reg 0x18: [mem 0xdfafc000-0xdfafffff 64bit]
pci 0000:03:00.0: reg 0x20: [io 0xdc80-0xdcff]
pci 0000:03:00.0: reg 0x30: [mem 0xdfb00000-0xdfb7ffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.1: bridge window [mem 0xdfa00000-0xdfbfffff]
pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15)
ACPI: Enabled 1 GPEs in block 00 to 1F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x7f686c00-0x7fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: disabling [io 0x0800-0x085f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x0800-0x087f]
pnp 00:00: disabling [io 0x0860-0x08ff] because it overlaps 0000:00:1f.0 BAR 13 [io 0x0800-0x087f]
system 00:00: [io 0x0c00-0x0c7f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:07: [mem 0x00100000-0x00ffffff] could not be reserved
system 00:07: [mem 0x01000000-0x7f686bff] could not be reserved
system 00:07: [mem 0x000c0000-0x000fffff] could not be reserved
system 00:07: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:07: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:07: [mem 0xfed20000-0xfed9ffff] has been reserved
system 00:07: [mem 0xffb00000-0xffbfffff] has been reserved
system 00:07: [mem 0xffc00000-0xffffffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:08: [io 0x0100-0x01fe] could not be reserved
system 00:08: [io 0x0200-0x0277] has been reserved
system 00:08: [io 0x0280-0x02e7] has been reserved
system 00:08: [io 0x02f0-0x02f7] has been reserved
system 00:08: [io 0x0300-0x0377] could not be reserved
system 00:08: [io 0x0380-0x03bb] has been reserved
system 00:08: [io 0x03c0-0x03e7] has been reserved
system 00:08: [io 0x03f6-0x03f7] could not be reserved
system 00:08: [io 0x0400-0x04cf] has been reserved
system 00:08: [io 0x04d2-0x057f] has been reserved
system 00:08: [io 0x0580-0x0677] has been reserved
system 00:08: [io 0x0680-0x0777] has been reserved
system 00:08: [io 0x0780-0x07bb] has been reserved
system 00:08: [io 0x07c0-0x07ff] has been reserved
system 00:08: [io 0x08e0-0x08ff] has been reserved
system 00:08: [io 0x0900-0x09fe] has been reserved
system 00:08: [io 0x0a00-0x0afe] has been reserved
system 00:08: [io 0x0b00-0x0bfe] has been reserved
system 00:08: [io 0x0c80-0x0caf] has been reserved
system 00:08: [io 0x0cc0-0x0cf7] has been reserved
system 00:08: [io 0x0d00-0x0dfe] has been reserved
system 00:08: [io 0x0e00-0x0efe] has been reserved
system 00:08: [io 0x0f00-0x0ffe] has been reserved
system 00:08: [io 0x2000-0x20fe] has been reserved
system 00:08: [io 0x2100-0x21fe] has been reserved
system 00:08: [io 0x2200-0x22fe] has been reserved
system 00:08: [io 0x2300-0x23fe] has been reserved
system 00:08: [io 0x2400-0x24fe] has been reserved
system 00:08: [io 0x2500-0x25fe] has been reserved
system 00:08: [io 0x2600-0x26fe] has been reserved
system 00:08: [io 0x2700-0x27fe] has been reserved
system 00:08: [io 0x2800-0x28fe] has been reserved
system 00:08: [io 0x2900-0x29fe] has been reserved
system 00:08: [io 0x2a00-0x2afe] has been reserved
system 00:08: [io 0x2b00-0x2bfe] has been reserved
system 00:08: [io 0x2c00-0x2cfe] has been reserved
system 00:08: [io 0x2d00-0x2dfe] has been reserved
system 00:08: [io 0x2e00-0x2efe] has been reserved
system 00:08: [io 0x2f00-0x2ffe] has been reserved
system 00:08: [io 0x5000-0x50fe] has been reserved
system 00:08: [io 0x5100-0x51fe] has been reserved
system 00:08: [io 0x5200-0x52fe] has been reserved
system 00:08: [io 0x5300-0x53fe] has been reserved
system 00:08: [io 0x5400-0x54fe] has been reserved
system 00:08: [io 0x5500-0x55fe] has been reserved
system 00:08: [io 0x5600-0x56fe] has been reserved
system 00:08: [io 0x5700-0x57fe] has been reserved
system 00:08: [io 0x5800-0x58fe] has been reserved
system 00:08: [io 0x5900-0x59fe] has been reserved
system 00:08: [io 0x5a00-0x5afe] has been reserved
system 00:08: [io 0x5b00-0x5bfe] has been reserved
system 00:08: [io 0x5c00-0x5cfe] has been reserved
system 00:08: [io 0x5d00-0x5dfe] has been reserved
system 00:08: [io 0x5e00-0x5efe] has been reserved
system 00:08: [io 0x5f00-0x5ffe] has been reserved
system 00:08: [io 0x6000-0x60fe] has been reserved
system 00:08: [io 0x6100-0x61fe] has been reserved
system 00:08: [io 0x6200-0x62fe] has been reserved
system 00:08: [io 0x6300-0x63fe] has been reserved
system 00:08: [io 0x6400-0x64fe] has been reserved
system 00:08: [io 0x6500-0x65fe] has been reserved
system 00:08: [io 0x6600-0x66fe] has been reserved
system 00:08: [io 0x6700-0x67fe] has been reserved
system 00:08: [io 0x6800-0x68fe] has been reserved
system 00:08: [io 0x6900-0x69fe] has been reserved
system 00:08: [io 0x6a00-0x6afe] has been reserved
system 00:08: [io 0x6b00-0x6bfe] has been reserved
system 00:08: [io 0x6c00-0x6cfe] has been reserved
system 00:08: [io 0x6d00-0x6dfe] has been reserved
system 00:08: [io 0x6e00-0x6efe] has been reserved
system 00:08: [io 0x6f00-0x6ffe] has been reserved
system 00:08: [io 0xa000-0xa0fe] has been reserved
system 00:08: [io 0xa100-0xa1fe] has been reserved
system 00:08: [io 0xa200-0xa2fe] has been reserved
system 00:08: [io 0xa300-0xa3fe] has been reserved
system 00:08: [io 0xa400-0xa4fe] has been reserved
system 00:08: [io 0xa500-0xa5fe] has been reserved
system 00:08: [io 0xa600-0xa6fe] has been reserved
system 00:08: [io 0xa700-0xa7fe] has been reserved
system 00:08: [io 0xa800-0xa8fe] has been reserved
system 00:08: [io 0xa900-0xa9fe] has been reserved
system 00:08: [io 0xaa00-0xaafe] has been reserved
system 00:08: [io 0xab00-0xabfe] has been reserved
system 00:08: [io 0xac00-0xacfe] has been reserved
system 00:08: [io 0xad00-0xadfe] has been reserved
system 00:08: [io 0xae00-0xaefe] has been reserved
system 00:08: [io 0xaf00-0xaffe] has been reserved
system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
system 00:08: [mem 0xfeda0000-0xfedacfff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 10 devices
ACPI: bus type PNP unregistered
PnPBIOS: Disabled by ACPI PNP
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
pci 0000:00:1f.0: BAR 13: [io 0x0800-0x087f] has bogus alignment
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [mem 0xdfd00000-0xdfdfffff]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0xdfc00000-0xdfcfffff]
pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.1: bridge window [mem 0xdfa00000-0xdfbfffff]
pci 0000:00:1e.0: PCI bridge to [bus 04]
pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
pci_bus 0000:01: resource 1 [mem 0xdfd00000-0xdfdfffff]
pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:02: resource 1 [mem 0xdfc00000-0xdfcfffff]
pci_bus 0000:02: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xdfa00000-0xdfbfffff]
pci_bus 0000:04: resource 4 [io 0x0000-0xffff]
pci_bus 0000:04: resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18348K (f5c1a000 - f6e05000)
Simple Boot Flag value 0x87 read from CMOS RAM was invalid
Simple Boot Flag at 0x7a set to 0x1
microcode: CPU0 sig=0xf34, pf=0x10, revision=0x13
microcode: CPU1 sig=0xf34, pf=0x10, revision=0x13
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1460998305.792:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 1717
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1280x1024x32, linelength=5120, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xc0000000, mapped to 0xf8480000, using 5120k, total 5120k
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [VBTN]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 915G Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 8192K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.1: version 2.13
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata1: port disabled--ignoring
ata2: port disabled--ignoring
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xfe00 ctl 0xfe10 bmdma 0xfea0 irq 20
ata4: SATA max UDMA/133 cmd 0xfe20 ctl 0xfe30 bmdma 0xfea8 irq 20
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 21, io mem 0xffa80800
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-59-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ff80
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-59-generic uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 22, io base 0x0000ff60
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.13.0-59-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.13.0-59-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000ff20
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.13.0-59-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:04: alarms up to one day, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: EISA: Detected 0 cards
cpufreq-nforce2: No nForce2 chipset.
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Using IPI No-Shortcut mode
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: f44ae1d762f91acfe9953e94a1d32c07335725d5'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 12:376:894
rtc_cmos 00:04: setting system clock to 2016-04-18 16:51:46 UTC (1460998306)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
isapnp: No Plug & Play device found
ata3.00: ATA-8: ST3250310AS, 3.ADA, max UDMA/133
ata3.00: 488281250 sectors, multi 8: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA ST3250310AS 3.AD PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 488281250 512-byte logical blocks: (250 GB/232 GiB)
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
sd 2:0:0:0: [sda] Attached SCSI disk
usb 2-2: new low-speed USB device number 2 using uhci_hcd
usb 2-2: New USB device found, idVendor=045e, idProduct=0040
usb 2-2: New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 2-2: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
usb 2-2: Manufacturer: Microsoft
tsc: Refined TSC clocksource calibration: 3191.999 MHz
usb 5-2: new low-speed USB device number 2 using uhci_hcd
usb 5-2: New USB device found, idVendor=413c, idProduct=2003
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-2: Product: Dell USB Keyboard
usb 5-2: Manufacturer: Dell
Switched to clocksource tsc
Freeing unused kernel memory: 880K (c19bf000 - c1a9b000)
Write protecting the kernel text: 6560k
Write protecting the kernel read-only data: 2776k
systemd-udevd[105]: starting version 204
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
sata_sil24 0000:03:00.0: version 1.1
tg3.c:v3.134 (Sep 16, 2013)
hidraw: raw HID events driver (C) Jiri Kosina
scsi4 : sata_sil24
scsi5 : sata_sil24
ata5: SATA max UDMA/100 host m128@0xdfafbf80 port 0xdfafc000 irq 17
ata6: SATA max UDMA/100 host m128@0xdfafbf80 port 0xdfafe000 irq 17
tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95751) rev 4001] (PCI Express) MAC address 00:0f:1f:e0:54:5f
tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input5
hid-generic 0003:045E:0040.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.0-2/input0
input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.0/input/input6
hid-generic 0003:413C:2003.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.3-2/input0
EXT4-fs (sda1): INFO: recovery required on readonly filesystem
EXT4-fs (sda1): write access will be enabled during recovery
EXT4-fs (sda1): orphan cleanup on readonly fs
EXT4-fs (sda1): 1 orphan inode deleted
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
ata5: SATA link down (SStatus 0 SControl 0)
ata6: SATA link down (SStatus 0 SControl 0)
random: nonblocking pool is initialized
Adding 2085884k swap on /dev/sda5. Priority:-1 extents:1 across:2085884k FS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[280]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
parport_pc 00:05: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
lp0: using parport0 (interrupt-driven).
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
FS-Cache: Loaded
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
intel_rng: Firmware space is locked read-only. If you can't or
intel_rng: don't want to disable this in firmware setup, and if
intel_rng: you are certain that your system has a functional
intel_rng: RNG, try using the 'no_fwh_detect' option.
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
FS-Cache: Netfs 'nfs' registered for caching
ACPI Warning: 0x00000828-0x0000082f SystemIO conflicts with Region \GLBC 1 (20131115/utaddress-251)
ACPI Warning: 0x00000828-0x0000082f SystemIO conflicts with Region \SACT 2 (20131115/utaddress-251)
ACPI Warning: 0x00000828-0x0000082f SystemIO conflicts with Region \SSTS 3 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
[drm] Initialized drm 1.1.0 20060810
gpio_ich: ACPI BAR is unavailable, GPI 0 - 15 unavailable
gpio_ich: GPIO from 206 to 255 on gpio_ich
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[drm] Memory usable by graphics device = 256M
checking generic (c0000000 500000) vs hw (c0000000 10000000)
fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] initialized overlay support
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
init: idmapd-mounting (/home/register/Desktop/fntreg) main process (329) killed by TERM signal
intel8x0_measure_ac97_clock: measured 54655 usecs (2633 samples)
intel8x0: clocking to 48000
type=1400 audit(1460998325.973:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=427 comm="apparmor_parser"
type=1400 audit(1460998325.973:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=427 comm="apparmor_parser"
type=1400 audit(1460998325.973:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=427 comm="apparmor_parser"
type=1400 audit(1460998325.973:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=428 comm="apparmor_parser"
type=1400 audit(1460998325.973:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=428 comm="apparmor_parser"
type=1400 audit(1460998325.973:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=428 comm="apparmor_parser"
type=1400 audit(1460998325.973:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=427 comm="apparmor_parser"
type=1400 audit(1460998325.973:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=427 comm="apparmor_parser"
type=1400 audit(1460998325.973:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=428 comm="apparmor_parser"
type=1400 audit(1460998325.973:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=428 comm="apparmor_parser"
init: failsafe main process (527) killed by TERM signal
init: Failed to obtain startpar-bridge instance: Unknown parameter: INSTANCE
init: statd-mounting (/home/register/Desktop/fntreg) main process (330) killed by TERM signal
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
init: cups main process (697) killed by HUP signal
init: cups main process ended, respawning
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
audit_printk_skb: 15 callbacks suppressed
type=1400 audit(1460998334.733:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=844 comm="apparmor_parser"
type=1400 audit(1460998334.733:18): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=844 comm="apparmor_parser"
type=1400 audit(1460998334.733:19): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=844 comm="apparmor_parser"
type=1400 audit(1460998334.733:20): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=844 comm="apparmor_parser"
type=1400 audit(1460998334.733:21): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=844 comm="apparmor_parser"
type=1400 audit(1460998334.737:22): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=844 comm="apparmor_parser"
type=1400 audit(1460998334.789:23): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=843 comm="apparmor_parser"
type=1400 audit(1460998334.789:24): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=843 comm="apparmor_parser"
type=1400 audit(1460998334.789:25): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="chromium" pid=843 comm="apparmor_parser"
type=1400 audit(1460998334.829:26): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=845 comm="apparmor_parser"
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
tg3 0000:02:00.0 eth0: Link is down
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (1157) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
tg3 0000:02:00.0 eth0: Link is down
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
tg3 0000:02:00.0 eth0: Link is down
audit_printk_skb: 123 callbacks suppressed
type=1400 audit(1460998360.829:68): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1597 comm="apparmor_parser"
type=1400 audit(1460998360.829:69): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1597 comm="apparmor_parser"
type=1400 audit(1460998360.829:70): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1597 comm="apparmor_parser"
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
tg3 0000:02:00.0 eth0: Link is down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
tg3 0000:02:00.0 eth0: Link is down
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
tg3 0000:02:00.0 eth0: Link is down
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
tg3 0000:02:00.0 eth0: Link is down
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
tg3 0000:02:00.0 eth0: Link is down
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
tg3 0000:02:00.0 eth0: Link is down
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
tg3 0000:02:00.0 eth0: Link is down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
tg3 0000:02:00.0 eth0: Link is down
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
tg3 0000:02:00.0 eth0: Link is down
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
tg3 0000:02:00.0 eth0: Link is down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
tg3 0000:02:00.0 eth0: Link is down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
tg3 0000:02:00.0 eth0: Link is down
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
tg3 0000:02:00.0 eth0: Link is down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
tg3 0000:02:00.0 eth0: Link is down
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
tg3 0000:02:00.0 eth0: Link is down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
tg3 0000:02:00.0 eth0: Link is down
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
tg3 0000:02:00.0 eth0: Link is down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
tg3 0000:02:00.0 eth0: Link is down
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
tg3 0000:02:00.0 eth0: Link is down
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
tg3 0000:02:00.0 eth0: Link is down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
tg3 0000:02:00.0 eth0: Link is down
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
tg3 0000:02:00.0 eth0: Link is down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
tg3 0000:02:00.0 eth0: Link is down
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
tg3 0000:02:00.0 eth0: Link is down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
tg3 0000:02:00.0 eth0: Link is down
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
tg3 0000:02:00.0 eth0: Link is down
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
tg3 0000:02:00.0 eth0: Link is down
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
tg3 0000:02:00.0 eth0: Link is down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
tg3 0000:02:00.0 eth0: Link is down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
tg3 0000:02:00.0 eth0: Link is down
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
tg3 0000:02:00.0 eth0: Link is down
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
tg3 0000:02:00.0 eth0: Link is down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
tg3 0000:02:00.0 eth0: Link is down
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
tg3 0000:02:00.0 eth0: Link is down
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
tg3 0000:02:00.0 eth0: Link is down
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
tg3 0000:02:00.0 eth0: Link is down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
tg3 0000:02:00.0 eth0: Link is down
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
tg3 0000:02:00.0 eth0: Link is down
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
tg3 0000:02:00.0 eth0: Link is down
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
tg3 0000:02:00.0 eth0: Link is down
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
tg3 0000:02:00.0 eth0: Link is down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
tg3 0000:02:00.0 eth0: Link is down
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
tg3 0000:02:00.0 eth0: Link is down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
tg3 0000:02:00.0 eth0: Link is down
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
tg3 0000:02:00.0 eth0: Link is down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
tg3 0000:02:00.0 eth0: Link is down
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
tg3 0000:02:00.0 eth0: Link is down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
tg3 0000:02:00.0 eth0: Link is down
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
tg3 0000:02:00.0 eth0: Link is down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
tg3 0000:02:00.0 eth0: Link is down
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
tg3 0000:02:00.0 eth0: Link is down
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
tg3 0000:02:00.0 eth0: Link is down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
tg3 0000:02:00.0 eth0: Link is down
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
tg3 0000:02:00.0 eth0: Link is down
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
tg3 0000:02:00.0 eth0: Link is down
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
tg3 0000:02:00.0 eth0: Link is down
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
tg3 0000:02:00.0 eth0: Link is down
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
tg3 0000:02:00.0 eth0: Link is down
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
tg3 0000:02:00.0 eth0: Link is down
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
tg3 0000:02:00.0 eth0: Link is down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
tg3 0000:02:00.0 eth0: Link is down
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
tg3 0000:02:00.0 eth0: Link is down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
tg3 0000:02:00.0 eth0: Link is down
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
tg3 0000:02:00.0 eth0: Link is down
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
tg3 0000:02:00.0 eth0: Link is down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
tg3 0000:02:00.0 eth0: Link is down
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
tg3 0000:02:00.0 eth0: Link is down
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
tg3 0000:02:00.0 eth0: Link is down
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
tg3 0000:02:00.0 eth0: Link is down
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
tg3 0000:02:00.0 eth0: Link is down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
tg3 0000:02:00.0 eth0: Link is down
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
tg3 0000:02:00.0 eth0: Link is down
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
tg3 0000:02:00.0 eth0: Link is down
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
tg3 0000:02:00.0 eth0: Link is down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
tg3 0000:02:00.0 eth0: Link is down
tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
tg3 0000:02:00.0 eth0: Link is down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
perf samples too long (2507 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
perf samples too long (5041 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
type=1400 audit(1461076964.355:71): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=29765 comm="apparmor_parser"
type=1400 audit(1461076964.355:72): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=29765 comm="apparmor_parser"
type=1400 audit(1461076964.355:73): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=29765 comm="apparmor_parser"